Generate carpentry compliance documents in under 30 seconds. RAMS, risk assessments, and COSHH assessments covering wood dust, power tools, and working at height.
No card required · 3 free documents · Cancel anytime
Generate these documents in under 30 seconds from your project details.
Risk Assessment & Method Statement
Required for site-based carpentry. Covers power tool use, working at height, manual handling of timber, and dust exposure.
Hazard identification and control measures
Required for all carpentry work. Key hazards: power tools, wood dust, manual handling, falls, noise, and hand-arm vibration.
Hazardous substances assessment
Essential for wood dust (classified as carcinogenic for hardwoods), timber treatments, adhesives, lacquers, and stains.
Step-by-step safe system of work
Required for first fix, roof carpentry, structural timber framing, and work near services.
Our templates are built around these requirements so your documents are compliant from the start.
Applies to all carpentry work on construction sites. Requires RAMS, CSCS cards, and compliance with the principal contractor's site safety rules.
Provision and Use of Work Equipment Regulations. Critical for carpenters using circular saws, routers, nail guns, and other power tools. Requires training, maintenance, and guarding.
Covers wood dust exposure (hardwood dust is a known carcinogen with a WEL of 3mg/m3), adhesives, wood preservatives, and varnishes.
Applies to roof carpentry, first fix at height, and any work on scaffolding or access equipment. Requires proper planning and fall prevention.
Yes. Hardwood dust is classified as a Group 1 carcinogen by the IARC, meaning it is a proven cause of nasal cancer. Softwood dust also causes respiratory problems. The Workplace Exposure Limit is 3mg/m3 for hardwood and 5mg/m3 for softwood. Under COSHH, carpenters must use extraction at source, RPE when cutting indoors, and maintain dust control equipment.
Under PUWER 1998, all power tools must be: suitable for the task, properly maintained and inspected, fitted with guards and safety devices, and only used by trained operators. This applies to circular saws, mitre saws, routers, planers, nail guns, and sanders. PAT testing of electrical tools is also good practice. Records of inspections must be kept.
A CSCS (Construction Skills Certification Scheme) card is not legally required but is demanded by virtually all principal contractors and main contractors as a condition of site access. You need to pass the CITB Health, Safety and Environment Test and hold a relevant NVQ or equivalent qualification to get a CSCS card.
Join UK carpenters & joiners who generate compliant documents in under 30 seconds.